RF engineer's toghtest job function?

ranica · 發表於 2011-7-19 18:21:58

招聘公司：A famous IC company
招聘岗位：RF engineer
工作地点：Shanghai

岗位描述：
Responsibilities 1. RF system design on schematic and PCB layout review, including critical component specification and part selection, RF chain margin calculation, device interconnection check, PCB EMI analysis and cross interference check. 2. Perform board level debug and testing including impedance matching (noise figure and gain for RX, power and efficiency for TX), device operating point optimization, RF calibration, 3GPP non-signaling/signaling testing target for GCF compliance. 3. Collaborate with core team engineers for specific issue logging, feedback, debugging and problem solving. 4. Provide technical support to customers and work with technical team and/or FAE for customer R&D projects.

ranica · 發表於 2011-7-19 18:22:19

职位要求：
Required skills and experience 1. 5~10 years experience in cellular radio system design or testing 2. Understanding of general RF and microwave principles including Smith Chart, multi-port S-parameter calculation, transmission line theory and impedance matching etc. 3. Knowledge of RF circuit analysis including filter design, noise figure calculation, amplifier (LNA/PA) design, oscillators and mixers, phase lock loop design etc. 4. A good knowledge in RF components, such as RF transceiver, SAW, duplexer, LNA and RF switch. 5. Experienced in lab hands-on test fixture and prototype making and impedance matching and tuning 6. Knowledge and experience in RFIC characterization and test, understand principles of RF calibrations and device optimization. 7. Experience and knowledge of GSM/GPRS/EDGE/WCDMA phone development process and RF performance DVT steps. Familiar with compliance tests for GCF/PTCRB 8. Familiar with RF testing equipments, CMU200, Agilent 8960, network analyzer, spectrum analyzer, and signal generator. 9. A good working attitude. 10. Excellent oral and written communications and interpersonal skills' able to function effectively in a team environment. 11. Master degree in Electrical Engineering with a specialization in telecommunications 12. Knowledge of RF system link budget calculation, wave propagation, antenna modeling and design is a plus.

能者與意者請email研發簡歷與chip123聯絡。

ranica · 發表於 2011-7-28 13:59:08

招聘公司：A famous IC company
招聘岗位：RF Test and Application Engineering
工作地点：Shanghai

岗位描述Job Description：

Your role will support the RF test and Application of advanced wireless SOC products at the board level. The work will include RF test, RF application, significant automatic test (ATE) development, and offers an excellent opportunity to work with sophisticated SOC designs. You will be working closely with a team of Systems engineers, RFIC designers, ASIC engineers, and marketing personnel. Versatility is essential.
Perform the RF test actions, such as RFIC test, RF system test and Platform test; Program the ATE with Visul Basic and Labview; Make test report and slides for team review; Platform design, bring up, trouble shooting and other application tasks if necessary.

职位要求：
Required Experience
- Bachelor of Science in Electrical Engineering (BSEE) or equivalent experience;
- RF test experience with board level, such as RFIC test, RF system test or Platform test are required;
- Program ATE with Visual Basic and Labview is required;
- Platform design, bringup, trouble shooting and Platform performance optimizing are perfered;
- Good RF theory knowledge and a good understanding about RF parameters, such as NF, Gain, IP3, Hamonic Rejection are required;
- RF circuit design and high digital circuit design (schematic & layout) is desired;
- Good team spirit and work altitude;
- Good communication skills.

ritaliu0604 · 發表於 2013-4-24 13:54:31

客户 a famouse communication device company
地点 Suzhou

职位描述 Responsibility：
1.Responsible for the design, development, evaluation and analysis, applying radio frequency engineering principles for wireless communications components, products or systems.
2.Performs circuit level design, testing and preparation of production drawing package. Develops and executes product in-process and final testing and integration plans for new or updated products. Test/evaluate competing products and technologies.
3.Investigates and understands the technical capabilities of competing equipment and stays current with RF/systems development. Researches new technologies.
4.Documents procedures/process related to work assignments including production drawings, tests plans, procedures, source control drawings, etc. Support Sales team and Product Line Management by assisting in the preparation of bids, proposals and Request for Quote for current and potential customers. Under the leadership of more senior engineers, develop technical solutions/product designs to serve customer requirements.
5.Prepare part specifications. Researches and evaluates potential vendors and makes recommendations as to the final vendor selection.

职位要求 Requirements：
1.Bachelor degree in Electrical Engineering.
2.5-8 years of RF circuit design experience.
3.Strong written command of English.
4.Optionally: experience working within international teams that are US and EU based.
5.Optionally: RF system design experience

ranica · 發表於 2013-5-15 15:32:28

模拟电路设计工程师
客户 A software agent company
地点 Shanghai

职位描述
负责模块电路设计

职位要求
职位要求：
2-3年（硕士）或3-4年（本科）模拟电路工作经验及以上
熟练掌握各种基本模拟电路模块设计
有amp及高速接口设计经验的优先
有高压ic 设计经验的优先
有power ic设计经验的优先
良好的团队合作能力

ranica · 發表於 2013-5-15 15:50:43

模拟信号IC设计工程师
客户 A famous IC company
地点 Shanghai

职位描述：
1，负责模拟集成电路芯片的定义，开发和验证；
2，配合市场部完成项目初始定义，主导项目技术可行性研究和立项；
3，根据产品定义和技术规范设计具体的电路架构，独立完成模拟电路设计、仿真、验证等工作；
4，规划版图布局，指导和协助layout工程师完成版图设计，确保版图达到电路设计的要求；
5，协助测试工程师制定测试规范和解决测试开发中的问题；
6，协助应用工程师，现场应用工程师解决客户及其他应用问题；
7，对产品前后端环节进行负责和追踪；
8，负责相关设计文档的撰写。

任职要求：
1，微电子或电子工程相关专业本科以上学历，五年以上模拟IC开发经验，熟练掌握模拟电路IC设计方法；
2，具备模拟芯片设计、仿真、布局、流片与测试经验，具备高速模拟电路流片经验优先；
3，对半导体器件以及工艺流程有比较深入的了解

ranica · 發表於 2013-5-17 14:37:53

模拟信号IC设计工程师
客户 A famous IC company
地点 Shanghai

职位描述
职位描述：
1，负责模拟集成电路芯片的定义，开发和验证；
2，配合市场部完成项目初始定义，主导项目技术可行性研究和立项；
3，根据产品定义和技术规范设计具体的电路架构，独立完成模拟电路设计、仿真、验证等工作；
4，规划版图布局，指导和协助layout工程师完成版图设计，确保版图达到电路设计的要求；
5，协助测试工程师制定测试规范和解决测试开发中的问题；
6，协助应用工程师，现场应用工程师解决客户及其他应用问题；
7，对产品前后端环节进行负责和追踪；
8，负责相关设计文档的撰写。

职位要求
任职要求：
1，微电子或电子工程相关专业本科以上学历，五年以上模拟IC开发经验，熟练掌握模拟电路IC设计方法；
2，具备模拟芯片设计、仿真、布局、流片与测试经验，具备高速模拟电路流片经验优先；
3，对半导体器件以及工艺流程有比较深入的了解

ranica · 發表於 2013-5-17 14:38:35

process intergration device NVM flash memory NOR development
客户 A famous IC company
地点 Shanghai

Job Description and Responsibilities:
Advanced embedded flash memory technology development, including cell definition, process integration, and cell optimization. Lead cross-functional, cross-organizational team to integrate embedded flash technology into foundries' and IDM's logic process. Act as technology interface to internal and external customers.

Key Competency Requirements:
Flash memory technology development experience.
In-depth semiconductor process and device knowledge.
Broad knowledge in IC development process, including CAD, circuit design, layout, TCAD simulation, device characterization, product testing, reliability, yield enhancement, and qualification.
Design of experiments and statistical analysis.
Strong analytical, organizational, and communicational skills.
Demonstrated success in a fast-paced, multifunctional, and multicultural team.

Education & Experience Required:
M. S. or Ph. D. in E.E., with at least 8 year of hands-on semiconductor technology development experiences.

ranica · 發表於 2013-5-17 14:40:40

Sr. Analog and Mixed-Signal Design Manager
客户 a high speed analog semiconductor company
地点 Shanghai

Responsibilities
Recruitment & manage a 3-5 analog and mixed-signal design engineers team in Shanghai
Work with local digital SoC team and US Headquarter teams on:
1. cultural and technical methodology integrations
2. design tool environment setup
3. training of engineering team members hired in Shanghai
4. project definitions and planning
5. project executions

Direct hands-on management of highly technical analog and mixed-signal engineering team
 Managing engineering team for successful execution of a analog and mixed-signal block/IP development
1. Definition
2. Design
3. Pre-Silicon Verification
4. Post Silicon Validation
5. Production

ranica · 發表於 2013-5-17 14:41:11

音频CODEC模拟 IC 设计工程师
客户 A famous IC company
地点 Shanghai

岗位职责：
1. 定义，设计CODEC中模拟电路或其它混合信号IC，负责模块和整体芯片的仿真和验证
2. 使用Matlab，CADENCE或MENTOR GRAPHICS等设计工具进行建模和模拟电路设计，仿真。
3. 设计版图布局，并协助版图工程师进行版图设计，确保版图达到电路设计的要求
4. 计划实验室评估计划，并使用实验室测试设备对工程样片进行测试评估。
5. 撰写设计，测试报告
6. 协助测试工程师进行中测和成测规范的定义和程序开发，验证

任职条件：
1、学历：
a) 电子类专业
b) 硕士＋至少3年相关工作经验
c) 本科＋至少5年相关工作经验
2、工作经历及技能要求
a) 具备扎实的电子电路和晶体管的理论基础，掌握IC设计流程、方法及工具，熟悉集成电路制造过程和工艺。
b) 熟悉各种ADC和DAC的架构和设计要点，有完整的音频Codec中sigma Delta ADC和DAC设计以及成功流片的经验；
c) 熟练应用Matlab，Simulink，Cadence设计工具进行ADC建模和设计。
d) 精通模拟电路，特别是开关电容电路的基本原理，设计技巧及关键模块的性能参数。
e) 具有良好的学习，分析和创新能力，良好理论与实际结合的能力，在电子电路方面有良好的悟性
f) 能熟练阅读英文资料并能用英文撰写技术规范，设计和测试报告。
g) 负责，敬业，具有良好的团队合作能力

ranica · 發表於 2013-5-23 15:34:26

Sr System Manager
公司：NO.82-A famous IC company
工作地点：上海

Responsibilities
1.Manage a team with functions of FPGA-based design prototyping, pre/post-silicon validation, engineering/testing board development, ARM cortex-M processors based firmware development
2.Communicate to management, other functional teams and customers in an multi-site, international environment
3.Hands-on knowledge in the system/board/firmware field and be able to help the team members

Mandatory Skills
1. Fluency in English (both Oral and writing) and communication skill is essential for this position
2. Good board design knowledge and experience in an IC engineering context
3. FPGA based emulation system and flow
4. Embedded system and firmware
5. Good understanding of computer interfaces and instrument control (USB, UART, GPIB etc)

ranica · 發表於 2013-5-23 15:34:33

Preferred Skills
1. Digital signal processing knowledge
2. Algorithm development
3. Product definition/Specification
4. Analog/Mixed signal measurement and characterization
5. Smart meter design and application

Education
Master Degree of Electrical Engineering, Computer Science or Control system

Experience
1.10+ years of working experience in the high-tech industry.
2.At least 3 years of experience in an international company, or oversea working experience.
3.At least 3 years of experience in a management or supervisor position
4.Experience in embedded system development
5.Experience in system validation

innoing123 · 發表於 2013-7-10 14:30:38

Developer Relations Engineer
公    司：A famous IC company
工作地点：上海

Accountabilities / Responsibilities:
Working with partners and customers to help them solve their problems.
Creating simple examples using OpenGL ES and OpenCL etc. to help educate developers.
Working with cutting edge hardware, building and flashing new OS images.
Writing and maintaining documentation.
Working with latest cutting-edge GPU APIs.
Performance analysis of partner applications including games, UI, etc.
Maintaining knowledge of mobile GPU architectures as they advance.
Visiting partners or representing XX at international conferences and tradeshows.

innoing123 · 發表於 2013-7-10 14:30:42

Job Requirements:
Essential Technical / Professional Skills
A good degree in a scientific discipline preferably Computer Science.
Experience with Linux or Android development platforms.
Experience with C, C++ and Java across Linux and Windows and an understanding of how to write portable software.
Understanding performance bottlenecks in mobile systems.
Knowledge of Khronos standards such as OpenGL ES and OpenCL.
Experience with version control systems and issue tracking (git and JIRA).
Excellent spoken and written English skills.
Problem solving skills in challenging circumstances.

It would be even better if you have experience in any of the following:
Embedded systems (especially if they are XX systems).
Linux internals and device drivers.
An ability to pick up new technologies quickly.
Experience with scripting languages, e.g. Bash.
Customer support.
Team management and leadership.

innoing123 · 發表於 2013-7-10 14:31:19

Webkit / Gecko Expert
公    司：A famous IC company
工作地点：上海

Accountabilities / Responsibilities:
Maintaining the existing code base: fixing bugs and adding new features.
Investigating and profiling existing HTML5 technologies.
Working with partners and customers to help them solve their problems.
Reviewing other people''s code.

Job Requirements: Essential Technical / Professional Skills：
A good degree in a scientific discipline preferably Computer Science.
Able to demonstrate deep understanding and expertise in WebKit or Gecko, other layout engines would also be of interest.
Experience with C, C++ and Java across a range of platforms (at least two of Linux, Mac OS X and Windows) and an understanding of how to write portable software.
Experience with HTML5, CSS3, JavaScript.
Comprehensive knowledge of Khronos standards such as OpenGL ES and OpenCL.
Strong testing skills and the knowledge of at least one xUnit framework.
Experience with version control systems and issue tracking (git and Jira).
Knowledge of different browsers and their underlying layout engines.
Excellent spoken and written English skills.

It would be even better if you have experience in any of the following:
Embedded systems (especially if they are xx systems).
Knowledge of the capabilities and limitations of mobile browser.
An ability to pick up new technologies quickly.
Experience with a scripting language, preferably Ruby, but Python is good too!
Customer support.
Understanding of development and project processes in depth.
Team management and leadership.

innoing123 · 發表於 2013-7-10 14:31:45

模拟电路设计工程师
公    司：A software agent company
工作地点：上海

职位描述
负责模块电路设计

职位要求：
2-3年（硕士）或3-4年（本科）模拟电路工作经验及以上
熟练掌握各种基本模拟电路模块设计
有amp及高速接口设计经验的优先
有高压ic 设计经验的优先
有power ic设计经验的优先
良好的团队合作能力

tk02376 · 發表於 2013-7-16 10:40:40

模拟信号IC设计工程师

公    司：A famous IC company
工作地点：上海

职位描述：
1，  负责模拟集成电路芯片的定义，开发和验证；
2，  配合市场部完成项目初始定义，主导项目技术可行性研究和立项；
3，  根据产品定义和技术规范设计具体的电路架构，独立完成模拟电路设计、仿真、验证等工作；
4，  规划版图布局，指导和协助layout工程师完成版图设计，确保版图达到电路设计的要求；
5，  协助测试工程师制定测试规范和解决测试开发中的问题；
6，  协助应用工程师，现场应用工程师解决客户及其他应用问题；
7，  对产品前后端环节进行负责和追踪；
8，  负责相关设计文档的撰写。

任职要求：
1，  微电子或电子工程相关专业本科以上学历，五年以上模拟IC开发经验，熟练掌握模拟电路IC设计方法；
2，  具备模拟芯片设计、仿真、布局、流片与测试经验，具备高速模拟电路流片经验优先；
3，  对半导体器件以及工艺流程有比较深入的了解

tk02376 · 發表於 2013-7-16 10:41:23

Senior NPI Engineer (SSD Product)

公    司：A famous flash memory company
工作地点：上海

Responsibilities:
Work with the global engineering teams and subcontractor engineering team to define performance matrix for *** SSD project and program in Shanghai
Develop and implement NPI holistic strategy and process for a scalable new product development and implementation process for SSD program
Manage new product capacity planning and scheduling (with IE/ MFG team). Ensure product ramp-up and on-time delivery.
Develop and implement product end of life processes.
Work with R&D, MFG, Engineering team to develop and standardize process for new SSD product

Requirements:
BS or MS Degree or above in Engineering or technical discipline
More than 5 years solid experience on new project management of storage /consuming electronics products.
Excellent English verbal and written communication skills, native English speaker preferred.
Must have good interpersonal, strong ability to work in a team environment.
Worked in International environment and can coordinate within different groups (cross functional team)
Self-driven

tk02376 · 發表於 2013-7-16 10:41:55

Sr Product Engineer

公司：A famous flash memory company
工作地点：上海

职位描述
In this position, the individual will be responsible for NAND Product Engineer and Package Qual/Rel tests setup/FA/Action Plan. The individual will also be responsible for Product Evaluation DOE for Rel/DPPM improvement and D/S and KGD Sort Yield improvement.

职位要求
The position requires a Bachelors degree or equivalent. Masters degree preferred. The ideal individual must have proven ability to achieve results in a fast moving, dynamic environment. Self-motivated and self-directed, however, must have demonstrated ability to work well with people. A proven desire to work as a team member, both on the same team and outside of the team. Ability to troubleshoot and analyze complex problems. Ability to multi-task and meet deadlines. Excellent communication (written and verbal) and interpersonal skills.

tk02376 · 發表於 2013-7-16 10:43:27

系统/应用工程师
• 公司：A famous IC design company in shanghai
• 工作地点：上海

主要工作职责:
1. 负责笔记本、电动工具、电动自行车等锂电池保护系统的软硬件设计
2. 参与公司锂电池计量和保护芯片的新产品的系统开发、设计及验证
3. 制定产品规格，就芯片原理及关键参数等技术问题与客户交流，了解客户真实需求
4. 配合设计人员完成芯片设计，提供建设性意见
5. 制定芯片验证方案，完成芯片的系统验证
6. 针对公司产品设计应用电路、编写应用软件、整理应用笔记等技术文档
7. 研究锂电池容量算法，提取满足客户需要的容量模型
8. 进行内部员工培训，为FAE提供技术培训和支持，
9. 为销售提供技术支持，解决用户遇到的技术问题

职位要求:
1. 计算机、电子、微电子、通信相关专业本科及以上学历；
2. 3年以上芯片应用经验，曾参与或主导锂电池计量或保护芯片产品的设计。
3. 了解笔记本、电动工具、电动自行车等应用系统的电气特性
4. 了解锂电池Cell及Pack特性，对锂电池容量模型具有一定了解
5. 正确理解Spec要求，可独立完成Spec的制定和芯片的验证工作
6. 精通嵌入式软件开发，有一定的C/C++编程语言经验
7. 丰富的电路分析、设计经验，熟悉常用的电池元器件的应用
8. 良好的沟通能力，可正确理解客户的真实需求
9. 认同客户导向，可快速解决客户问题
10. 具备良好的读写与英语能力
11. 积极进取，良好的团队合作精神。

		自動登錄	找回密碼
密碼			申請會員

RF engineer's toghtest job function?

RF Engineer