代徵外商半導體研發中心工程師數名 月薪8萬台幣起

ranica

【工作內容】
先進製程與模組開發 (DRAM/ Flash/ Logic)
- Photolithography (e-beam, EUV, OPC/RET, Photo Resist Materials),
! X6 J+ ~! K: n6 |: _  Dry Etch, Cleaning & CMP, Diffusion, Ion Implantation, Metallization,
) B! H% P1 h  s# t2 G1 r  Metrology & Inspection, etc.
- Device Isolation, Transistor, Capacitor, Dielectric
) P! D) A! Q* S) l- High-K/Metal Gate, SiO2/SiON Gate Dielectric
8 z8 l% L- Z5 N* Q$ H- Low-K, Interconnect, etc.
※ OPC: Optical Proximity Correction (Comput. Litho)
   MPC: Mask Process Correction
8 v' H6 c1 s8 \7 e9 z' L
. X9 c! r3 m/ t6 p+ @2 rFEOL/BEOL 製程整合 (DRAM/ Flash/ Logic)
新型記憶體: PRAM, STT-MRAM, ReRAM
TCAD/ECAD
  @& q/ c, p) I& b+ @" C- Process & Device/Material Modeling, Circuit Compact/Reliability Modeling
4 g* w$ Z7 f2 W' ^- O+ P- Circuit Simulator Development
- System-Level Modeling/Simulation, Virtual Platform, HW/SW Co-Design
- Simics/CoWare/SOC Designer UserMemory Controller/Memory Architecture/
8 k. w- e% E/ b. M3 T9 F  SSD Research Experience

ranica

8 [, L  ^" K- n( H* A, ?先進CMOS Image Sensor (CIS)開發
- U" D" d3 V4 b; d% k, ?- Pixel Design, Image Signal Processing, Mixed IC Design,
, X" ^# O4 Z: x8 t* I  Analog/Desital Design
- P3 ~3 ^/ i" b, c. N) ]. p9 E$ j7 m- CIS Process Development
8 P  O: S2 m/ Y; J
- Z, S1 }: U0 K& S/ ~  ^/ q封裝製程開發
6 K$ P" T0 j- c' @' @' |7 k+ U- Wire Bonding & Flip Chip Package/Wafer Level Package (WLP/TSV)
  `/ v4 X9 w- p9 {; N1 M3 f9 @$ O; R- Thinning PKG/Chip Warpage Control, Signal/Power/Thermal
- Material Development & Failure Analysis
2 I; \- p2 K, ]' z$ ?
新材料開發與環境污染控制
1 n- l, {9 J1 V* D' i( |' d- Material(Wafer, PR, Gas, Chemical, Thin Film) Development
- FAB Environment Contamination Monitoring & Control
) v/ c! T, z& y- T) {/ ?9 S- Material & Environment Failure Analysis and Quality Guarantee
, Z- j$ ~3 a& Q
【徵求條件】
1.相關科系：電子電機工程、物理/光學、化工、材料工程、金屬工程、機械工程、工業工程等
. N4 D) R* e9 E' D% @2.碩士畢業具兩年工作經驗者
5 `( Z: G2 t6 s3 m) I* c3.博士班在學生或應屆畢業生
) O+ h) }5 |) n8 x) K
【工作地點】亞洲（中、韓）
【工作時間】9am~6pm
【月休】周休二日
【薪資範圍】 月薪8萬台幣起 年薪5-7萬USD
【需求人數】 數名

能者與意者請email研發簡歷與chip123聯絡。

mayluli1981

回復 2# ranica
' ]- x% h% P3 N7 c
( u$ o( s) O( i1 l6 A# y6 r
   你好 我是劉至剛  工作一年經驗可以? 感謝你百忙抽看履歷

tk02561

~歡迎社會新鮮人~
7 N$ ~& W' O* [4 l4 ^  J4 P( j7 G/ [ 新竹/台中/台南皆有職缺

" J" _7 E  {; z/ Q' n Job opening
(1) Field Service/Technical Support Engineer (Hsinchu /Taichung /Tainan)
) p! j4 I" m  C& C2 d$ d* O  C  } *大學以上, 電機電子工程/機械工程相關
*薪資： 大學無經驗56K起，碩士無經驗62K起 (含交通津貼)
5 S: J$ X2 j* `# A) N4 g7 ^  [" \ 1. ME / EE major with bachelor degree or above will be highly preferred.
2. Good English speaking, writing, and listening, with TOEIC or GEPT certificate is a plus.
" P8 [! U9 z9 ?4 ?4 `  P  a( ~ 3. Good attitude on learning new technology and willing to take challenge.
7 A8 Q5 x; [+ f3 T% M& F! B 4. Semiconductor ( process / equipment )experience is preferred, but not essential.
7 n. {4 I' q( `' Y1 y' F" z9 U
Note* English resume and autobiography is required

jcase

Currently, our client, a foreign enterprise in the IT industry, is searching for SW & HW Product Marketing talents.
As our client welcomes promising people, the position and salary of their opening is negotiable.
. r7 E* {) D0 b" z% \! b. W
& w7 k7 W0 ~$ K2 [3 m: c# A1 w6 v6 ]【工作職缺】SW & HW Product Marketing

  u& X9 m) P0 G* I4 L6 V【工作內容】
Function: Software Product Marketing
, m% [5 a2 U; K! h- b' h% y% Z1.Define the market requirements with regards to operating systems, solutions,  and software applications
/ R8 C% B7 s3 K/ R+ Q2.Determine the appropriate SW definition and specs and/or solution  that support the HW/PC platform which will meet these requirements
3.Initiate and/or approve any change requests as new information is acquired or technical/marketing/cost tradeoffs is required during the development phase
# j1 L* M0 t0 s8 g4.Lead the Concept Phase and extends through the management of the life cycle of the solution including SW refreshes in between to ensure time to market
5.Responsible for the royalty, NRE and development cost as part of the profitability of the platform and portfolio
+ X7 S, y/ `8 ?! ^! t8 W# |- _
Function: Hardware Product Marketing
" a% h) Q' i  {4 b$ l+ p7 a# ?5 Y+ {: w( j1.Serve as a key member of the product team to develop strategies for assigned product lines and devise go-to-market plans for implementation of best practices for market penetration and product launch initiatives
2.Identify market opportunities and competitive market analysis
) a- T* y* i9 O  A. U3.Develop compelling new product/service solutions to meet market needs and work with marketing resources to develop and deliver marketing messages
4.Responsible for defining and delivering a product-marketing plan that combines an in-depth understanding of the market, competitive and consumer for a group of products
& Z5 O2 Z/ D( x" ?5 e3 i5.Plan the launch of new products and releases, and manage the cross-functional implementation of the plan
* p( J5 I- j: X$ x7 {
【徵求條件】
6 y1 M0 a+ U9 z6 f; zProficient commands in English with a good business mindset is a must
. `- ^4 ?, u) g+ UKorean communication skills is a plus
! b) X4 }- U2 |8 V
# [' |. {8 N+ }; _【工作地點】 Asia (Taiwan/Korea)
【工作時間】 9am~6pm
【月休】 Weekends
, Z. h1 R; J4 X5 s9 C【薪資範圍】 80,000 NTD and above/month (Negotiable)
5 X$ |6 Y8 |& H【需求人數】 Many

ranica

招聘公司：A famous EMS company
7 ~5 {8 B* y* Q5 s2 w& @2 U$ |招聘岗位：SQE Manager
$ X& M- X$ c6 r2 I+ }  X工作地点：Wuxi
% f3 s7 f+ [& ~& Q, e- o
岗位描述：
; b( G7 w5 k2 D7 f4 _! o" Y! O! MRESPONSIBILITIES 5.1 It shall be the responsibility of the Material Manager to ensure that the SQE Manager understands this description and to lead the SQE Group. 5.2 It shall be the responsibility of the SQE manager to lead/direct his department in supplier management and technical support for incoming quality control. 6.0 REPORTING RELATIONSHIP 6.1 The SQE Manager will report to Material Manager for all functions related operations. 7.0 JOB SUMMARY 7.1 To lead the SQE group in managing suppliers, developing and driving suppliers to continuously improve. 7.2 To contribute to the revenue by assuring quality materials through fully following the procedures and guidelines. 7.3 To provide the technical support for IQC.
, p! [: t9 {( b' p2 [$ O3 t
职位要求：
PREREQUISITES 8.1 Degree in science or technical discipline with minimum 3 years of managerial experience in quality assurance or supplier quality assurance field. 9.0 JOB DESCRIPTION 9.1 Recruit and maintain a high caliber staff in supplier quality engineering. 9.2 Train and develop the engineers to fulfill the requirement of the material quality assurance. 9.3 Motivate and organize the SQE’s to achieve their job description. 9.4 Interface with the other functions, departments and higher managerial levels. 9.5 Monitor and review the performance of the staffs. Recommend salary increase and job arrangement as appropriate. 9.6 Make supplier survey schedule based on the needs of workcell and Strategic Commodity. Make and drive the goals of the SQE function. 9.7 Technically support IQC. 9.8 Monitor and drive the supplier continuous improvement. 9.9 Conduct supplier survey, plant audit and participate supplier qualification. 9.10 Promote and assure the implementation of the instructions from Material Manager

ranica

招聘公司：A famous EMS company
招聘岗位：DFx Engineer
! i7 t4 b& X, c3 H5 p7 l) p* Z工作地点：Shanghai
( x9 U' T- t( [
岗位描述：
 SUMMARY VAVE DFx Engineers are considered the “technology leaders” in ***’s manufacturing processes and solutions. They understand and have mastered technologies specific to area of DFx such as Design for Assembly and Design for Manufacturability. They convey technical solutions for areas of competence both to other engineers and to business personnel. DFx Engineers will work with engineering teams to develop solutions for projects within given time and cost constraints. Essential Duties and Responsibilities
 Thorough knowledge of DFx processes, reporting mechanisms and tools (ex. Valor for DFM).
$ ^4 v: p; C1 h; w1 Z Provides mentoring to team in supporting and driving appropriate DFx processes.
$ c( o9 }$ Z+ l  z) Y) _  B4 U Leads and participates in all elements of DFx analysis including product teardowns, PCBA manufacturing optimizations and cost reduction analysis.  Gather and organize analyzed data and generate professional reports of such activities and conclusions.

ranica

 Stay current on DFx activity and direction within the global manufacturing engineering organization. This includes alignment with other internal organizations such as Design Engineering, GOS AME, MSG, Global Services and manufacturing sites.
3 _( x2 w7 f2 X0 ~ Work with Managers, Business Units, System Architects and Project Design Engineers in quoting information that will aid in the overall quoting process.  Support the development and utilization of processes for DFx analysis and documentation.
 Exercises and trains on best practices associated with DFx as related to manufacturing, in order to provide the best cost effective solutions.
 Works directly with Functional Managers to develop both general and specific training programs to increase the overall knowledge of the Value Engineering group in the area of manufacturing.
 Support management in identifying internal and external resources to support Value Engineering efforts.
 Work concurrently with *** CAD Services, Business Unit Management, Manufacturing, and Test, Purchasing, and Quality departments throughout the analysis process to insure the best possible solution.

ranica

 Assigned to projects of diverse scope in which analysis of the situation and/or data is required to develop potential solutions. Stay abreast of the latest technology and techniques to provide designs that are competitive and cost effective.
 Support Business Development’s efforts with new customer interactions.
3 j- t! `/ y: }  h8 {$ p Support internal and external design groups on product development from concept through Deployment
 Assist BU’s, workcells, and external customers in resolving design related manufacturing issues
8 W) m. X" P' J/ q: y Comply and follow all procedures within the company security and safety policies. GENERAL SKILLS AND COMPETENCIES
3 D% T/ p- q' t  z) q Extensive knowledge of Manufacturing Engineering philosophies and processes;
2 w+ {6 A% G- `" w9 U+ w General knowledge of the advanced technology practiced, both in manufacturing processes and R&D areas.
 Familiar with project and resource management.
7 G& \1 ^+ k$ `9 F/ ]. v Ability to manage and prioritize work assignments.
 Requires strong interpersonal skills, listening, verbal and written communication.
 Create technologically informative presentations and present/teach to *** groups and customers worldwide.

ranica

职位要求：
0 L' l5 F! g& t Job Requirements
% h* [5 i) t6 u3 K& g3 Z Bachelor’s degree from four-year College or university related to the advanced technology field, or the equivalent in education and experience.
 Three or more years experience in a manufacturing environment, with diverse skills in several of the following disciplines: PCB assembly process, product assembly process, mechanical design, materials, electronics, NPI.
 An equivalent combination of education and experience will be considered.
 Additional Information LANGUAGE SKILLS
0 G- A9 r! ~' a Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.  Ability to write reports, business correspondence, presentation materials, and procedure manuals.
' \1 [* Y% P) [9 t Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

ranica

MATHEMATICAL SKILLS
! G) g& S- S+ Q5 B/ f Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
9 P  \/ W2 U- ]# x1 f Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY
' t* E" \) ~6 b( B! k- X0 d Ability to define problems, collect data, establish facts, and draw valid conclusions.
 Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
1 B8 {1 t' Q8 y6 `) \; b
) r- ^; ?2 Z& MPHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Individual may be required to sit, stand, walk regularly and occasionally lift up to 35 lbs. Specific vision requirements include reading of written documents and use of computer monitor screen frequently. WORK ENVIRONMENT The work environment characteristics described here are representative of those a team member encounters while performing the essential functions of this job.

ranica

招聘公司：A famous EMS company
招聘岗位：SQE Manager
工作地点：Wuxi
0 q* ?2 m( z8 ~$ Z. V0 G* I
岗位描述：
  b- J2 T% g0 W3 }' Z7 n) z1 ?5 BRESPONSIBILITIES 5.1 It shall be the responsibility of the Material Manager to ensure that the SQE Manager understands this description and to lead the SQE Group. 5.2 It shall be the responsibility of the SQE manager to lead/direct his department in supplier management and technical support for incoming quality control. 6.0 REPORTING RELATIONSHIP 6.1 The SQE Manager will report to Material Manager for all functions related operations. 7.0 JOB SUMMARY 7.1 To lead the SQE group in managing suppliers, developing and driving suppliers to continuously improve. 7.2 To contribute to the revenue by assuring quality materials through fully following the procedures and guidelines. 7.3 To provide the technical support for IQC.
6 ]3 H# H0 G. [& L# Y) @
7 v7 c8 J) D1 q5 [& X职位要求：
PREREQUISITES 8.1 Degree in science or technical discipline with minimum 3 years of managerial experience in quality assurance or supplier quality assurance field. 9.0 JOB DESCRIPTION 9.1 Recruit and maintain a high caliber staff in supplier quality engineering. 9.2 Train and develop the engineers to fulfill the requirement of the material quality assurance. 9.3 Motivate and organize the SQE’s to achieve their job description. 9.4 Interface with the other functions, departments and higher managerial levels. 9.5 Monitor and review the performance of the staffs. Recommend salary increase and job arrangement as appropriate. 9.6 Make supplier survey schedule based on the needs of workcell and Strategic Commodity. Make and drive the goals of the SQE function. 9.7 Technically support IQC. 9.8 Monitor and drive the supplier continuous improvement. 9.9 Conduct supplier survey, plant audit and participate supplier qualification. 9.10 Promote and assure the implementation of the instructions from Material Manager

ranica

招聘公司：A famous EMS company
招聘岗位：DFx Engineer
工作地点：Shanghai

6 q  c8 l( N; M2 S. B岗位描述：
  ]4 G3 h  i% V1 h0 D5 C  C. c& N SUMMARY VAVE DFx Engineers are considered the “technology leaders” in ***’s manufacturing processes and solutions. They understand and have mastered technologies specific to area of DFx such as Design for Assembly and Design for Manufacturability. They convey technical solutions for areas of competence both to other engineers and to business personnel. DFx Engineers will work with engineering teams to develop solutions for projects within given time and cost constraints. Essential Duties and Responsibilities  Thorough knowledge of DFx processes, reporting mechanisms and tools (ex. Valor for DFM).  Provides mentoring to team in supporting and driving appropriate DFx processes.  Leads and participates in all elements of DFx analysis including product teardowns, PCBA manufacturing optimizations and cost reduction analysis.  Gather and organize analyzed data and generate professional reports of such activities and conclusions.  Stay current on DFx activity and direction within the global manufacturing engineering organization. This includes alignment with other internal organizations such as Design Engineering, GOS AME, MSG, Global Services and manufacturing sites.  Work with Managers, Business Units, System Architects and Project Design Engineers in quoting information that will aid in the overall quoting process.  Support the development and utilization of processes for DFx analysis and documentation.  Exercises and trains on best practices associated with DFx as related to manufacturing, in order to provide the best cost effective solutions.  Works directly with Functional Managers to develop both general and specific training programs to increase the overall knowledge of the Value Engineering group in the area of manufacturing.  Support management in identifying internal and external resources to support Value Engineering efforts.  Work concurrently with *** CAD Services, Business Unit Management, Manufacturing, and Test, Purchasing, and Quality departments throughout the analysis process to insure the best possible solution.  Assigned to projects of diverse scope in which analysis of the situation and/or data is required to develop potential solutions. Stay abreast of the latest technology and techniques to provide designs that are competitive and cost effective.  Support Business Development’s efforts with new customer interactions.  Support internal and external design groups on product development from concept through Deployment  Assist BU’s, workcells, and external customers in resolving design related manufacturing issues  Comply and follow all procedures within the company security and safety policies. GENERAL SKILLS AND COMPETENCIES  Extensive knowledge of Manufacturing Engineering philosophies and processes;  General knowledge of the advanced technology practiced, both in manufacturing processes and R&D areas.  Familiar with project and resource management.  Ability to manage and prioritize work assignments.  Requires strong interpersonal skills, listening, verbal and written communication.  Create technologically informative presentations and present/teach to *** groups and customers worldwide.

ranica

职位要求：
- C9 B# N5 D' W1 a7 H! Q# p* t2 T4 v1 e Job Requirements  Bachelor’s degree from four-year College or university related to the advanced technology field, or the equivalent in education and experience.  Three or more years experience in a manufacturing environment, with diverse skills in several of the following disciplines: PCB assembly process, product assembly process, mechanical design, materials, electronics, NPI.  An equivalent combination of education and experience will be considered.  Additional Information LANGUAGE SKILLS  Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.  Ability to write reports, business correspondence, presentation materials, and procedure manuals.  Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS  Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.  Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY  Ability to define problems, collect data, establish facts, and draw valid conclusions.  Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Individual may be required to sit, stand, walk regularly and occasionally lift up to 35 lbs. Specific vision requirements include reading of written documents and use of computer monitor screen frequently. WORK ENVIRONMENT The work environment characteristics described here are representative of those a team member encounters while performing the essential functions of this job.

ranica

招聘公司：A famous EMS company
招聘岗位：Software Engineer
) Q- A: ~+ N3 S& M. u; F工作地点：Shanghai

8 U- k3 M$ Z9 M岗位描述：
SUMMARY Take lead for Diagnostic Software and Software Test Utility development for enterprise products’ Engineering and Manufacture verification. Communicate with Customers as Software contact Window. Provide necessary inputs to cross function teams for design quality assurance. Provide exceptional support to external and internal customers, team members, and other persons through technical project cooperation. Drive innovation and continuous improvement within ***** Circuit by harnessing new design technologies and methodologies. ESSENTIAL DUTIES AND RESPONSIBILITIES include, but are not limited to the following: Work with system architect to get well understood of hardware testing requirements and identify test items for Diagnostic system. Design test modules, and come out test module design document. Implement test module based on Linux Operation system. Modify, optimize and debug the Linux kernel according to requirements from Diagnostic system. Bring up Linux OS, and analyze the root cause of the issues related to Linux OS. Assist Application engineer to debug the issues which appear in main control program. Co-work with Firmware engineer and Hardware engineer to resolve the SW issues.

ranica

职位要求：
) e5 p( I# A, W9 G% y2 [Person Background: Candidates should have 3 or more years experience in programming under Linux Operation System. Typically, the following essential qualifications and experiences would be requested: a) Bachelor or Master in Electronics, computing, software engineering or similar b) Good English speaking and literacy c) Strong working knowledge of Linux kernel and driver includes char device development, block device development, and kernel optimizing development. d) Excellent knowledge of code programming includes C++, C, ASM and Shell etc. e) Working knowledge of computer system architecture includes NB, SB, PCI/PCIe bus, IPMI, I2C bus, BUS controller etc. f) Working knowledge of application development includes PIC program development and multiple thread program development. g) Basic knowledge of BIOS, BMC(SP), SAS/SATA, Networking. Person Attributes: The successful candidate will be a self-motivated individual capable of working with a minimum of supervision in a dynamic team environment. Good interpersonal skills: be able to communicate in English and with members of other teams, departments and clients; as a high degree of liaison is needed.

innoing123

求才若渴 求才若渴 求才若渴
迎接網通黃金十年，歡迎投身網通業，有興趣請來信，謝謝
) N* D/ A8 I8 M
5 ^+ v/ u! p! q8 ?【公司名稱】 智邦科技股份有限公司
7 o' U* g9 S* W4 V  f+ M【工作職缺】 硬體研發工程師
【工作內容】 Ethernet/Enterprise/Data Center Switch (網路交換器) 硬體設計/測試    ODM product with many famous foreign networking company
【徵求條件】
+ T+ L. N, }' D/ n8 k, N9 E, [1. 硬體設計工作資歷兩年以上，能獨力完成設計具網通硬體設計相關經驗者尤佳
2. 熟悉OrCAD畫線路圖，無須親自Layout(Allegro)  但必須懂得review Layout(Allegro)
- A1 F) W+ N! J% t& h: N3. 懂得基本的Verilog/VHDL語法 for CPLD coding(ex: register R/W, counter, divider, debounce...etc)
5 n: g4 f# d8 [4. 熟悉示波器、邏輯分析儀、烙鐵等硬體必備工具使用
5. 英文讀、寫無礙，聽、說流利更好
) `; b# G( _# i0 `: [
【工作地點】 新竹科學園區
! }8 U6 C+ C: Z【月休】     周休二日/特休依勞基法規定
( `) q( Y  ^" t5 n9 m. Q0 O  @' f; a【薪資範圍】 36K - 70K or more (主要根據能力、經歷、學歷面議)
4 U0 w/ [  f; {0 o6 v) j/ J【需求人數】 數人

ritaliu0604

【公司名稱】 帷豐科技有限公司
) v( w1 w+ m. T6 j  @( l【工作職缺】 硬體工程師 (全職)
; ?7 e% ?+ {/ O- h! c: z# K【工作內容】
  G, E* m9 u5 Y7 M# p1. PCB電路設計與Layout。
2. 電路除錯。
【徵求條件】
1. 上班族、應屆畢業生。
2. 工作經歷不拘、大學以上學歷。
9 s. l# U0 R# j/ R3 h. s/ q8 g3. 具基本電路設計及問題分析能力。
8 c4 \" k* J* d. B) {4. 熟悉PADS等電路設計工具。
5. 具ESD、EMC除錯能力尤佳
7 e( L3 ~" ?/ @$ }! i. J7 r
* q. n* d1 s3 v" D, P【薪資範圍】35K~45K(主要依能力面議)
【需求人數】 2名
6 n  ?/ T7 E. |2 I【工作地點】 台中市西屯區台中港路三段101號10F
【工作時間】 9:00~18:00
【月休】 週休二日、國定假日
4 A/ i) t6 t8 O4 G. m8 Z【公司福利】
1. 端午、中秋禮品與年終獎金。
2. 年度員工國內外旅遊活動、員工尾牙活動。
3. 特休、年假、女性同仁生理假/產假/育嬰假/家庭照顧假、陪產假。
4. 國內外出差交通補助。

ritaliu0604

台積電研發替代役 -南科-(設備、製程、製程整合、產品、資訊、品質暨可靠度)
9 n7 u/ F1 J0 t" x' O
8 ]. R2 A! `, H# M" e) {0 a工作內容
研發替代役
& m+ ]/ U" k. }1 ~1 k/ S$ J
& W2 D& H: l' y. }; I/ m& K預聘
畢業前先給予正式的聘僱書，服完兵役即可報到就業。不論外在經濟如何變化，台積公司承諾保障預聘同學的工作機會。

申請資格
+ A% J3 ~' A# m* @" P0 m' R2013應屆畢業碩、博士學生，具兵役義務者，主修電機(子)／光電／物理／材料／化學／化工／機械／資工／工工／統計等理工相關系所。
# k2 Z4 _0 y( a5 j' H5 [
  J' ^3 j  Y0 N7 |申請方式
9 q/ f3 d4 ?( X) o' X& S/ _有意者請將履歷寄至信箱:chien19871116@yahoo.com.tw，履歷將會轉至內部推薦管道
台積制式履歷：http://www.tsmc.com/download/hr/TSMC_Resume_IDL.doc
4 s/ \( z5 s3 [- x# r研發替代役履歷：http://www.tsmc.com/download/hr/TSMC_CV.pdf

mister_liu

提供全球性品牌客戶高品質的部品; 快速馳騁的馬車需要有耐力 公司正式宣佈急徵千里馬。
& |  H1 F3 F# l) j* q
工作內容
試用期滿,年薪70萬元.升任課長級主管,年薪100萬元+配車.
. p0 V" O- [& c; o+ P$ b7 z2.三個月工廠輪班
實習訓練.達成CNC電腦車床加工校模技術能力.加工程式編寫技術
3 G5 u1 `: E2 s' u* ?能力.
3.1年工廠基層實務訓練.達成QC工程表各項製程檢驗能力.

擔任

1.工業工程師 :負責生管,倉管,採購.
2.設計工程師 :由2D繪製,審圖；3D審圖；模具組合圖繪製,審圖；模具發包；模具驗收；鑄造,加工,塗裝試模,生產條件,品質狀況紀錄.新產品發表會召開,檢討,執行.量產查核結案.
3.機械工程師 :模具驗收,鑄造試模作業,模具修改設變提報,鑄造作業標準建立,鑄造QC工程表建立.鑄造品管作業執行.鑄造組長/課長職務代理人.
+ X$ i% G/ i; i2 g3 w& J4.化學工程師 :塗裝試模作業,塗裝設變提報,塗裝作業標準建立,塗裝QC工程表建立.塗裝品管作業執行.塗裝組長/課長職務代理人