Chip123 科技應用創新平台

 找回密碼
 申請會員

QQ登錄

只需一步,快速開始

Login

用FB帳號登入

搜索
1 2 3 4
查看: 3442|回復: 2
打印 上一主題 下一主題

[問題求助] 請推薦 -2.5V輸出的LDO

[複製鏈接]
跳轉到指定樓層
1#
發表於 2008-1-2 17:48:29 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式
因為要給OP和INA ±2.5V的POWER SOURCE
目前是用LM337來設計,
我有找到MAX1735...但只提供200mA輸出..
不曉得還有沒有其他的 -2.5v Negative Linear Regulator, 請各位推薦一下,謝謝!
分享到:  QQ好友和群QQ好友和群 QQ空間QQ空間 騰訊微博騰訊微博 騰訊朋友騰訊朋友
收藏收藏 分享分享 頂 踩 分享分享
2#
 樓主| 發表於 2008-1-8 11:34:08 | 只看該作者
請推薦一下-2.5v Negative Linear Regulator
謝謝!
3#
發表於 2008-1-16 14:54:03 | 只看該作者
試試看這個吧!!  網路上找的  不知道何不合乎需求?
The UCC384 family of negative linear series pass regulators is tailored for low drop out applications where low quiescent power is important. Fabricated with a
BCDMOS technology ideally suited for low input to output differential applications, the UCC384 will pass 0.5A while requiring only 0.2V of input voltage headroom.
Drop out voltage decreases linearly with output current, so that drop out at 50mA is less than 20mV. Quiescent current consumption for the device under normal
(non-drop out) conditions is typically 200μA. An integrated charge pump is internally enabled only when the device is operating near drop out with low VIN. This guarantees that the device will meet the drop out specifications even for maximum load current and a VIN of –3.2V with only a modest increase in quiescent current.
Quiescent current is always less than 350μA, with the charge pump enabled. Quiescent current of the UCC384 does not increase with load current.

[ 本帖最後由 sjhor 於 2008-1-16 02:55 PM 編輯 ]

本帖子中包含更多資源

您需要 登錄 才可以下載或查看,沒有帳號?申請會員

x
您需要登錄後才可以回帖 登錄 | 申請會員

本版積分規則

首頁|手機版|Chip123 科技應用創新平台 |新契機國際商機整合股份有限公司

GMT+8, 2024-5-15 01:20 AM , Processed in 0.102013 second(s), 18 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表